This kind of airflow type drying machine is our newly developed advanced drying equipment which also called pipeline type dryer, it is suitable to dry the material which size is 3-5mm in diameter, such as sawdust, rice husk, biomass powder etc.
The machine adopt hot air jet device for automatic suction,hot airflow with high speed,which can make get the full air mixing materials,good drying effect 60%-70% moisture of the material can be dryed until get the standard that can be used by system stick machine (8%-12%),our dryer only need one time.
1) Raw materials should be sawdust, suitable for drying the moisture 20-40%; Final moisture 8-12%.
2) Diameter of raw materials: (3- 5mm)
3) Temperature of Hot Air: 180-250 Celsius degree.
4) This dryer reduces moisture to 8-12% with lower cost consumption and high efficiency.
5) The wood sawdust dryer is equipped one fuel boiler, inlet, steel pipe, exhaust blower (fan), cyclone. Wet materials are input into the hopper. The fuel boiler generates hot air which mixes with wet materials and then is sucked into the pipes by the exhaust blower (fan) quickly. And then hot air is flowing and going though the curving pipes and buffer (drying chamber) of dryer, thus wet materials is finished to dry, and the dried materials are expelled out by the exhaust blower (fan).
1. After installation, start the blower, check the running direction and see if the suction at the material inlet is normal.
2. Tie up a bag whose both ends are open around the outlet of the dust catcher.
3. Feed the raw material to the hopper. Remove or screen out large particles mixed in the material before drying, which will benefit drying speed.
4. Put fuel into the furnace and light it, start the blower. When the air temperature at the outlet of blower gets to 100°C, begin material feeding and drying process.
5. Large piece of the material at dregs-outlet must be removed, which is favorable to feeding.
We insist on "Quality is the soul of company" and take customers as our god, owned outstanding R&D team with the sense of innovation and cooperation, timely and effectively after-sales service team, professional installation guidance team with 30 years experience. We devote to all-round service of all the products from shipment to maintenance.
Our professional service includes: Free training, Guidance Installation and Debugging.
Guaranteed Time: One Year
If you have any question, please c ontact us freely. Our after-sales service team on-line will do the best to accomplish your sincere requirement on time.
Q: How long is your guarantee?
A: One year(Calculated from the equipment arrives the customer's side.).
After this period we will definitely support you when needed.
You will be welcome to contact us with any problem may happened.
Q: Will you send engineers to install the plant?
A: yes, but at an extra cost payable by the customer.
Or you can get local contractors to do the commissioning and we send one supervising engineer.
Q: Do you have some foreign customers using your equipment?
A: yes, we have.our company has established business relationships with customers in Russia,German,Slovakia,Ukraine,Vietnam,Pakistan, the Philippines, Indonesia, Thailand, Pakistan, Egypt ,Iraq, Iran, Jordan, Saudi Arabia,Syria, Libya etc.