The wet sawdust is input into the hopper with screw feeding to avoid stocking. The stove generates hot air, hot air mixed with wet sawdust, and then sucked into the pipes by the exhaust blower(fan) , flowing and go though the curving pipes and buffer(drying chamber) of dryer, thus the wet sawdust is dried, and dried sawdust is discharged from the outlet with air lock.
The stove in simple structure, you just need to open the door of the stove and put manually into wood briquettes, wood waste like tree branch, wood chips, coal or any waste that can burn.
• Hot air enters into stirring and drying chamber from the bottom of dryer with suitable atomizing speed. It exerts strong shearing, blowing, floating and rotating effect to raw material. Therefore raw material is granulated through centrifugating, shearing, impacting and friction effect.
• It strengthens the process of heat exchange. At the bottom of dryer, the large and damp granule is crushed under the action of stirrer and the granule that is small in particle and contain less moisture will lift accompanied with revolving air stream.
• During the period of lift, it is dried further. Because gas and solid two phases flow in heat exchange, so the machine has strong drying capacity.
1.Variety of feeding device for selection, continuous stable feeding, process won't produce bridge phenomenon in the middle.
"At the bottom of the dryer set special cooling device, avoids the production material in the bottom of drier deterioration phenomenon.
2.Second-ranking special pressure seal and bearing cooling device, effectively prolong the service life of transmission parts.
3.Low special air distributing device, reduce the resistance of the equipment, and provide the effective of air dryer.
4.There are rotation flow pieces and low drying chamber fitted with grading ring, adjustable fineness and raw material. (such as calcium carbonate water regulator to 0.1% or less)
5.Low compared with other drying method, which can effectively increase the material proportion.
6.Low dry indoor circumferential gas velocity is high, the material stay time is short, effective prevent deterioration phenomenon of wall material viscosity and heat sensitive material, to achieve efficient, fast, small equipment, mass production.
Low categories: inorganic borate, calcium carbonate, hydroxide, copper sulfate, ferric oxide, barium carbonate, antimony trioxide, all kinds of metallic hydroxide, all kinds of heavy metal salt, synthetic cryolite and so on.
Low organic matter: atrazine (pesticides), lauric acid, benzoic acid, benzoic acid, antiseptic, Dan, sodium oxalate, cellulose acetate, etc.
Low ceramic: kaolin clay, silica, clay.
Low dye categories: anthraquinone, black ferric oxide, indigo blue pigment, butyric acid, titanium hydroxide, zinc sulfide, all kinds of azo dye intermediates.
Second-ranking food: soy protein, starch gel, grains, wheat, sugar, wheat starch.
(1) Select equipmeent model
(2) Design and manufacture products accroding to clients' special requirement
(3) Train technical personnel for clients
2. Services during the sale:
(1) Pre-check and accept products ahead of delivery
(2) Help clients to draft solving plans
3. After-sale services
(1) Assist clients to prepare for the first construction scheme
(2) Install and debug the equipment
(3) Train the first-line operators on site