1.It meets the GMP hygienic requirements to realize drying by finishing continuous charging, continuous discharging and grinding under vacuum condition;
2.It can realize controllable drying temperature(30ºC-145ºC) ,unchanged thermal sensitivity of materials, recover ability of 95%solvent as to solvent materials and vacuum drying of oxidizing materials without oxidation;
3.It can finish drying, grinding, and granulating under vacuum condition;
4.Continuous discharging starts after 20--60minutes,with product yield up to 99%;
5.Highly sticky materials will not stick to the belt(which is Teflon PTFE),and crystal materials will not damage the crystal form after drying;
6.The moisture content of the dried product can optimize such major parameters as temperature, vacuum degree and speed of the drying process, enabling the utilization of the equipment to achieve the best economic benefit;
7.It adopts PLC automatic programming control system to realize high-degree automation and greatly reduce labor operating costs;
8.Its operating cost is only one third of or even lower than of its similar drying equipment;
9.CIP automatic online cleaning system with various cleaning methods can clean the equipment completely and quickly after drying and meet the GMP requirements;
10. It is suitable for large-scale, continuous and automatic operation.
Vacuum Belt Dryer developed by our company is the kind of continuous drying machine for drying of striping, flaky and granule materials of good gas permeability, especially suitable for those does not allow high temperature such as de-water vegetable and Chinese herb. The series has featured of rapid dry, high evaporation strength and good quality. It can also be applied to the drying of de-water paste materials when granulator or become clubbed form.
De-watering vegetable, granule feed, sodium glutamate, desiccated coconut, organic pigment, synthetic rubber, acrylic emulsion, herbs, plastic, etc.
The materials are uniformly load on the mesh-belt by feeder. The mesh-belt uses generally 12-60 mesh stainless steel screen and it is drawn and moved inside mesh belt dryer by a transmission device. The drier is composed of several units. For each unit, the hot air is circulated separately. Temperature in each unit is separately controlled. Air blowing speed and exhausting moisture humidity is also measured by probes. Drying process is: hot air passes through the mesh-belt from the top to the bottom or from the bottom to the top, and this woll complete the heat and mass transfer process. The air pipe of the top is connected with fan, one part of air is circulated, some exhausted gas is discharged with a special moisture exhausting blow.
Act as a good advisor and assistant of clients; enable them to get rich and competitive from the returns of their investment.
1) Select suitable equipment model.
2) Design and manufacture products according to clients' special requirements.
3) Train technical personnel for clients.
4) Professional suggestion for customer
Services during the sale:
Respect clients; devote ourselves to improving the total value of clients.
1)take photos(including raw material, semi-products, final products, and loading products)
1) Pre-check and accept products ahead of delivery.
2) Prepare all clearance documents, so that the customer clearance smoothly.
Provide considerate services to minimize clients' worries.
1) Provide engineering drawings of the equipment.
2) Training(including installation, maintenance) to customers.
3) Install and debug the equipment, ensure the dryer running smoothly.