Continuous Fluid Bed Dryer is widely used for drying, cooling and damp decreasing (or carry out at the same time) for powder or granule materials. Material is fed into the machine from feeding inlet, and moves forward continuously along with the level of fluid bed under the action of vibration force. Hot air passes through fluid bed and carried out heat exchanging with damp material. Then the damp air is exhausted out by exhaust fan, some fine powder is collected by cyclone separator and dust remover, and dried product is discharged from discharging outlet.
1. Use vibration motor as vibration source. It is smooth in running and convenient in maintenance. The noise is low and the using life is long.
2. The state of fluidization is uniform and no dead gaps and broken phenomenon.
3. It is better in adjustment and can be widely applied, The thickness, the speed of raw material moving inside and the change of vibration breadth can be stipples adjusted.
4. It makes little harm to the surface of raw material. So it can be used for fragile materials. If the granule is abnormal, the effect of process cannot be affected.
5. Fully sealed construction, effectively prevents cross infection between materials and air.
6. The efficiency of machinery and heat is high and 30-60% of energy can be saved than ordinary dryer.
The machine is suitable for drying, cooling, humidifying of powder and granule materials in chemistry, pharmaceutical,
foodstuff, beverage and mining industries, also can be used for drying, cooling and humidifying simultaneously.
1. Chemical medicine: a variety of pressed particles, boric acid, borax.
2. Food materials: monosodium glutamate, sugar, salt, slag, seeds.
3. Materials can also be used for cooling, humidification.
1.Q:How is the progress for an new order?
A:1) we will provide pre-sale service, it is free. Just contact us ,and tell us what you want to dry, and capacity you need and some necessary conditions, our sales and technical people will give the best suggestion for you.
2) Once you have confirm, or if you like, welcome to visit our factories. You can sign the contact with us, and pay deposit.
3)After deposit, we will send you the drawing of each part, and confirm with you. If okay, we begin producing.
4)When completed, we will send the picture or video to you for confirmation. Or you can come to check. If all okay, payment of balance will be needed.
5)We send the machine and you will get the machine soon.
2.Q:Is the after-sales good?
A:Order is beginning of every business, not end. And after-sales service should good enough, otherwise we will have not future order. So do not worry about this.