Filter washing and drying three in one

- Mar 27, 2019-

Floor structure

A. Fixed type: The chassis is welded to the equipment cylinder and has a heating system for heating and drying.

B. Detachable type: The chassis clamps the upper and lower hairs with a clamp to achieve sealing. The chassis can be disassembled and grounded with hydraulic cylinders. The lower part of the chassis is equipped with wheels for moving to clean the filter plates. The chassis has a heating system, one is a flow channel type, and the other is a pipe heating type. The filter plate is bolted from below the bottom plate to make the filter plate flat and there is no bolt in contact with the product.

Unloading device: The dry material is automatically unloaded from the side discharge port by the reverse rotation of the stirring blade, and directly enters the package.

Discharge device: It is divided into manual control discharge valve and hydraulic control discharge valve. After the valve core is closed, the inner side is matched with the inner cylinder of the equipment cylinder, which does not affect the inner movement of the stirring. The discharge valve seal can take a variety of seals such as metal seals. The product discharge valve for the non-bacteria requirement can be added with a sterilization treatment. The discharge valve structure can optionally be of a fixed or quick open configuration.


power system

A. After the motor is reduced by the motor reducer, the spindle is rotated. The speed adjustment is realized by frequency conversion speed-speed.

B. Stirring and lifting, the chassis lift is powered by a hydraulic pump on the hydraulic station. Pump station control is available in manual or electronic control.

C, the reducer uses German SEW company products.

D, the speed is controlled by the inverter 6-25 rpm, which can be adjusted freely, including the safety device.


main feature:

A: Energy saving: the motor power is small, and the speed ratio of the speed reducer is large.

B: The equipment can be cleaned in place, sampled in place, steam elimination du (122 ° C)

C: The lower chassis and the cylinder are connected by a double-channel inclined sealing ring, and the non-dead-angle is in accordance with the "GMP" to eliminate the cleaning. Achieve a perfect seal and form a good fit.

D: Reduce the manual operation of the operator and simulate the contamination of the product. Adapt to the "GMP" requirements.

https://www.srchemicalequipment.com/