Material classification and working principle of multifunctional reactor

- May 26, 2018-

The multifunctional reactor can be divided into two types, carbon steel and stainless steel, according to its material. When it is used, the jacket and inner tube of the multifunctional reactor are normal pressure, reasonable in structure, durable, and have high temperature resistance and resistance. Corrosion, easy to use and so on. At present, it has been widely used in petroleum, chemical, rubber, food, scientific research and other industries to complete the differentiation, polymerization, condensation and other processes, as well as reaction equipment for many other processes such as organic dyes and intermediates.

The multifunctional reaction kettle is mainly composed of heating jackets, lids, agitators, shaft sealing devices, supports and transmission devices. The pot and lid of the entire equipment are sealed and connected by flanges. At the same time, there is a discharge hole in the lower part of the pot body, a stirrer in the pot, a pot hole on the pot cover, feeding observation, stirring observation, temperature measurement and pressure measurement, steam extraction fractionation, and safety venting.

The multi-functional reaction vessel will not operate at the same time because of its user operating conditions and production process. When it is used, it will effectively open and stir the lid process, with the paddle type, anchor type, frame type, spiral Types, etc.), support types (suspended or standoff type), and packing seals.

Reactors can be divided into general reactors and multi-functional reactors according to their performance to a certain extent. Under normal circumstances, ordinary reactors will only have one set of drives, and they can complete their single agitation during the operation process. And the reaction, among more productive companies, the use of common reactors has far from meeting the needs of production processes and production capacity. The multifunctional reactors combine stirring, dispersing, and homogeneous emulsification functions into one. The multifunctional reactor replaces the old three-kettle old process, which increases production capacity while saving equipment investment.

Multifunctional reactor works

1. Low-speed stirrer: The stirring type of low-speed stirrer is usually frame type, paddle type and frame anchor type. The stirring speed range is 0~130r/min. The primary stirring of the material is mainly to prepare for the dispersion and emulsification of the subsequent process.

2. High-speed disperser: The disperser disc of the high-speed disperser is saw-toothed. When it is rotated at high speed, a strong turbulence zone is formed. The slurry layers at different flow rates diffuse to each other to achieve rapid dispersion. Dispersion shaft speed 0 ~ 1200r/min adjustable.

3. Emulsification machine: The fast-running rotor and the very precise stator cooperate with each other to produce a very strong hydraulic cutting, squeezing, cutting, etc., so as to achieve the purpose of homogeneous emulsification.