Structural design and component composition of stainless steel reaction kettle

- May 31, 2019-

The stainless steel reaction kettle is operated to achieve the heating, evaporation, cooling and low-speed mixing reaction functions required by the process. Pressure vessels must comply with the standards for steel pressure vessels, which must comply with the standards for steel welded atmospheric vessels. The pressure requirements during the reaction process also have different design requirements for the container. Production must be processed, tested and commissioned in strict accordance with the relevant standards. The stainless steel reaction kettle is different according to different production processes and operating conditions. The design structure and parameters of the reactor are different, that is, the structure of the reactor is different, and it belongs to non-standard container equipment.

The stainless steel reaction kettle is a comprehensive reaction vessel, and the design of the reactor structure function and configuration accessories is based on the reaction conditions. From the beginning of the feed-reaction-discharge, the pre-set reaction steps can be completed with a high degree of automation, temperature, pressure, mechanical control (stirring, blasting, etc.), reactants/products during the reaction. Strict regulation of important parameters such as concentration. The structure generally consists of a kettle body, a transmission device, a stirring device, a heating device, a cooling device, and a sealing device. Corresponding auxiliary equipment: fractionation column, condenser, water separator, collection tank, filter, etc.

The reaction kettle is composed of a kettle body, a kettle lid, a jacket, a stirrer, a transmission device, a shaft sealing device, a support, and the like. When the height of the agitating device is relatively large, the multi-layer stirring blade can be used, and the mixing device can be arbitrarily selected according to the requirements of the user. A jacket is arranged outside the wall of the kettle, or a heat exchange surface is arranged in the vessel, and heat exchange can also be performed by external circulation. The support seat has a support type or an ear mount or the like. Gear speed reducer should be used when the speed exceeds 160 rpm. The number, specifications or other requirements of the opening can be designed and manufactured according to user requirements.

www.srchemicalequipment.com