Stainless Steel Reactor Structure

- May 07, 2018-

The reactor consists of a kettle body, a kettle cover, a jacket, a stirrer, a transmission device, a shaft sealing device, a support, etc. The stirring device can use a multi-layer stirring blade when the high diameter is relatively large, and can also be arbitrarily selected according to the requirements of the user. Matching, outside the kettle wall set jacket, or in the device to set the heat exchange surface, but also through the outer loop for heat exchange, support seat with support or ear support, etc., more than 160 rotation speed should use a gear reducer. The number of openings, specifications or other requirements can be designed and manufactured according to the user's requirements.

1. Packing seals are usually applied under normal or low pressure conditions. Generally, the pressure is less than 2 kg.

2. Mechanical seals will be used in general medium pressure or vacuum conditions. The general pressure is negative pressure or 4 kg.

3. In the case of high pressure or high volatility of the medium, magnetic seals will be used, typically more than 14 kilograms. In addition to magnetic seals that use water to cool down, other seal types will increase the cooling jacket beyond 120 degrees.