The reaction vessel is a reaction device and must be observed during operation. Otherwise, it will be damaged due to many reasons, leading to the forced shutdown of production. The operation of the reactor must pay attention to many aspects.
First of all, we must strictly follow the rules and regulations to operate the reactor.
Secondly, before operation, it should be carefully checked for abnormality. During normal operation, the upper cover and the terminal on the board must not be opened to avoid electric shock; pressure operation is strictly prohibited; during the pressure test with nitrogen, the pressure is carefully observed. Changes in the table, to achieve pressure test pressure, immediately close the nitrogen valve switch; heating speed should not be too fast, pressure should also be carried out slowly, especially the stirring speed, allowing only slow speed.
Finally, when the kettle body is heated to a higher temperature, it should not be in contact with the kettle body to avoid burns. After the experiment, the temperature should be reduced first, and no rapid cooling is required to prevent damage caused by excessive temperature differential pressure. At the same time, the power supply must be unplugged.
At the same time after the use of the reactor should pay attention to maintenance, so that the autoclave can have a better life.